Wysyłka ekranu powyżej 250 cm długości za pobraniem
Zapytaj nas o dostępność
The RGB Booster achieves high image quality with levels of color reproduction and brightness that make each color stand out. It combines Panasonic’s proprietary Vivid Color Control technology with a Lamp Modulation Drive System for a 1-chip DLP™ projector that produces bright and vivid colors.
Vivid Color Control
This unique control technology optimizes the use of the color segment areas of the color wheel. It increases the brightness of each RGB color by minimizing the unallocated portions between the colors, to achieve truly vivid coloring.
Lamp Modulation Drive System
With the advanced lamp modulation technology, the projector is now able to control the lamp intensity for each of the red, green, blue and white segments of the color wheel separately. Because the actual light output is controlled in relation to each color segment, light usage is optimized and color balance is obtained without lowering the brightness. This results in bright, vivid images with increased color fidelity.
The 300-watt AC lamp unit features an efficient light focusing reflector. Using only a single lamp unit, the PT-DX500 achieves 4,500 lumens of brightness, while the PT-DZ570 and PT-DW530 offer 4,000 lumens. All models boast a high contrast ratio of 2,000:1.
300-watt AC Lamp
In response to the increasing popularity of widescreen image viewing, including Blu-ray content, the PT-DZ570 features native WUXGA resolution for high-definition viewing. This brings you lifelike projection of intricate, highly detailed images.
The frequency of the video signal is analyzed for each scene, and distribution data is extracted for the ultra high, high, medium and low-range frequencies. This unique Panasonic image correction circuit optimally enhances each area of the screen. High-precision detection is applied from 2-dimensional horizontal/vertical data to produce more natural, lifelike images with high definition.
This function corrects the image quality to project sharp, clear images even in brightly lit rooms. A luminance sensor measures the ambient brightness, and a realtime adjustment function optimizes sharpness and brightness according to the surroundings. This adjustment function also works together with the Detail Clarity Processor 3 to enhance the realism and vividness of projected images. This makes images easier to view and offers high contrast.
* There is no actual change in the rated brightness or contrast ratio.
When the output level of the source device fluctuates due to the performance of the device or its cable connections, the original black and white levels of the image content cannot be reproduced correctly. With the PT-DZ570, you can view the waveforms on the screen and adjust the settings either automatically or manually as you prefer.
This imaging mode is similar to DICOM Part 14, which is a medical imaging standard. It reproduces X-ray images with remarkable clarity. It also allows information to be shared by many viewers on a large screen, such as during conferences or training courses.
* This product is not a medical instrument.
Do not use it for actual medical diagnosis.
Optimal color reproduction can be achieved by selecting this mode, compliant with ITU-R Recommendation BT.709, when images from an HDTV source are projected.
• 3D color management system
• Full 10-bit image processing
• Progressive cinema scan (3:2 pulldown)
• Dynamic sharpness control
• Digital noise reduction
• IP conversion
• AI scene control